General features:
- Crystallization-stable formulation
- Particularly slow heat development
- Long working and curing time
- Low-viscosity formulation for optimum flow
- Contains UV absorbers and n-neck light stabilizers
- Ideal for large-volume potting such as river tables
- Particularly high carbamate resistance
- Highly transparent glass-like curing
- Excellent self-deaerating properties
- Bio-based ingredients in the epoxy resin
- Free of CoRAP and sVHC substances
- State-of-the-art, particularly low-yellowing base amines and additives
- 0% VOC content (EU value)
- Outstanding wetting ability of the substrate
- Very low shrinkage (<0.1%)
- Compatible with z.B. wood, concrete, glass, metal, glass and carbon fiber mesh, natural stone, quartz sand, marble, granite
- Can be used with all DIPON® Alcohol paints, resin pastes & effect pigments
Areas of use:
- Ideal for large format projects: LuminaCast 8 Table Flow is specially designed for the production of impressive river tables and for use in large silicone molds.
- Excellent for furniture: It enables potting heights of at least 20 mm up to 50 mm at 20°C.
- Safe for food: Without sVHC or CoRAP ingredients. Food safe after complete curing.
- Pours higher than 50 mm: Please note that higher casting quantities are possible depending on the amount of material and ambient temperature, provided this is well below 20°C.
Usage:
LuminaCast 8 Table Flow is accurately weighed in a clean container in a mixing ratio of 2:1 by weight or, if a particularly high strength is required, 100:40 by weight. A scale and two mixing cups are required to ensure exact weighing and mixing. Never mix by volume, as this can lead to an incorrect result. First mix the A and B components at max. 300 revolutions/minute for approx. three to four minutes. Then pour the A+B mixture into a new clean container and mix again for three to four minutes. Scrape off some of the resin from the edges of the old container and drop it into the center of the new one. This process is important to obtain a mixture that is as homogeneous as possible.
- Mixing ratio 2:1 (A+B) by weight
- Processing time (23°C), 500 grams: approx. 180 min. (23°C- > 40°C)
- Recommended material temperature (A+B): min. 22°- 25°C
- Recommended ambient temperature: 12°C – 19°C
- Dyn. viscosity (mPa*s) 23°C: A 730 ± 50
- Dyn. viscosity (mPa*s) 23°C: B 70 ± 50
- Layer thickness (20°C): 20 – 50 mm
- Hardness after 7 days (23°C): Shore D80
- Heat resistance: approx. 64°C
Labeling according to CLP/GHS Regulation
Lumina Cast Komponente A
Warning: Contains 4,4′-methylene diphenyl diglycidyl ether Reaction mass of 2,2′-methylenebis(p-phenyleneoxymethylene)bisoxirane and 2,2′-methylenebis(ophenyleneoxymethylene)bisoxirane and 2-p-(oxiranylmethoxy)benzyl-phenoxy-methyl-oxirane Fatty acids, C16-18 and C18 unsaturated, methyl esters, epoxidized Reaction mass of methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate and bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate.
Hazard statements
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.
Precautionary statements
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of the reach of children.
P103 Read all instructions carefully and follow them.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P273 Avoid release to the environment.
P280 Wear protective gloves/eye protection/face protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any
contact lenses if possible. Continue rinsing.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
Lumina Cast 8 Table Flow Komponente B
Danger: Contains trimethylolpropane poly(oxypropylene)triamine
Hazard statements
H302+H312 Harmful if swallowed or in contact with skin.
H318 Causes serious eye damage.
H411 Toxic to aquatic life with long lasting effects.
Precautionary statements
P101 If medical advice is needed, have container or label at hand.
P102 Keep out of the reach of children.
P103 Read all instructions carefully and follow them.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any
contact lenses if possible. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.
P321 Specific treatment (see on this label).
P330 Rinse mouth.
P362+P364 Take off contaminated clothing and wash before reuse.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations
