Aerosol Epoxy AB, for removing bubbles from epoxy resin – 400 ml

Usage

Before use, shake the cylinder vigorously for about 15-30 seconds. Spray an even thin layer on the wet epoxy resin surface from a distance of approx. 15-30 cm. Depending on the workpiece, either a wide or round nozzle is used for spraying. DIPON® EPOXY AB anti-bubble KORREKTOR SPRAY aerosol can only be used in well-ventilated rooms and using a suitable respirator.

ATTENTION! DO NOT USE FIRE/BURN ON EPOXY RESIN AFTER USING AEROSOL. FIRE DANGER!!

DANGER! Extremely flammable aerosol, H226. Flammable liquid and vapour, H373. May cause damage to organs through prolonged or repeated exposure, H312 + H332. Harmful in contact with skin or if inhaled, H315. Causes skin irritation, H319. Causes serious eye irritation, H335. May cause respiratory irritation, P210. Keep away from heat, hot surfaces, sparks, open flames and other types of ignition sources. Don’t smoke. Keep the package tightly closed. If you feel unwell, call a POISON CENTER / doctor, P312 + P332 + P313. In case of skin irritation: Get medical attention, P403 + P235. Store in a well-ventilated, cool, fireproof place. CAUTION: Protect from direct sunlight. Storage temperature< 20 ° C. Protect from frost.