Epoxy Resin LuminaCast 3 Crystal Flow

General features:
Crystallization is stable
Bio-based ingredients in epoxy resin
Free of CoRAP and sVHC substances
State-of-the-art base amines and additives with extremely low yellowness
Mixing ratio: 2:1 by weight (A+B)
Usage time (23°C), 200 grams: approx. 35 min (23 °C -> 40 °C)
Recommended material temperature (A+B): 20°- 24°C
Recommended ambient temperature: 20°C – 25°C
Viscosity A (mPa*s) at 23°C: A 730 ± 50
Viscosity B (mPa*s) at 23°C: B 140 ± 50
Layer thickness (20°C): 1 – 10 mm
0% VOC content
Excellent absorbency (on wood) and adhesion
Very little shrinkage (< 0.1%)
Suitable for use with wood, concrete, glass, metal, glass and carbon fiber fabrics, natural stone, quartz sand, marble, granite

Fits:
Create jewelry using silicone molds with a casting height of 1 mm to 10 mm.
Craft stylish trays, stands and other accessories.
Create glass and carbon laminates and other shapes where outstanding clarity is essential.
Ideal for creating stone carpets and various mortar products.
Versatile for casting or lamination, including techniques such as spray lamination, press lamination, infusion, vacuum lamination or traditional hand lamination.
In case of food contact: The formula does not contain sVHC or CoRAP substances. After approximately 14 days of complete chemical curing at 25°C, the product is suitable for food contact.

How to use:
LuminaCast 3 Crystal Flow should be accurately weighed into a clean container with a mixing ratio of 2:1 by weight . A scale and two mixing cups are required for accurate weighing and mixing. Do not mix by volume as this may cause an incorrect result. Mix components A and B together, mixing time about 5 minutes. The A+B mixture is then transferred to a new clean container and mixed again for three to four minutes.

Special features:
Sustainability: With a 70% natural, bio-based formulation, we focus on environmental responsibility.
Longevity: Our low-yellowing hardener recipe and the resin’s excellent UV stabilizer ensure your artwork will shine for a long time.
LuminaCast Epoxy Resin System: An integral part of the world’s most advanced epoxy resin system, LuminaCast 3 Crystal Flow offers state-of-the-art ingredients for impressive results. The system offers a solution for every project, from jewelry to woodwork.

Safety instructions Component A:

Content: reaction mass of 4,4′-methylenediphenyldiglycidyl ether 2,2′-[metüleenbis(p-fenüleenoksümetüleen)] bisoxirane and 2,2′-[metüleenbis(ofenüleenoksümetüleen)] bisoxirane and [[2-[p- ( oksiranüülmetoksü)bensüül] Phenoxy]methyl]oxirane oxirane, mono[(C12-14-alkyloxy)methyl]derivative Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate and bis(1,2,2,6,6-pentamethyl -4-piperidyl)sebacate

Attention! H315 Causes skin irritation. H319 Causes severe eye irritation. H317 may cause an allergic reaction to your skin. H411 ​​Toxic to aquatic life, long term effects.

Warning! P101 If medical attention is needed, have container or label at hand. P102 Keep out of reach of children. P103 Read all instructions carefully and follow them. P261 Avoid breathing dust/fume/gas/mist/vapour/spray. Avoid release of P273 to the environment. P280 Wear protective gloves/goggles/face protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. If possible, remove contact lenses. Continue rinsing. P333+P313 If skin irritation or rash occurs: Get medical attention. P501 Dispose of contents/container in accordance with local/regional/national/international regulations

Safety instructions Component B:

Content: phenylcarbinol, 3-aminomethyl-3,5,5-trimethyl-cyclohexylamine, cyclohexanemethanamine, 5-amino-1,3,3-trimethyl-, reaction products bisphenol-A-diglycidyl ether homopolymer 1,3-B (aminomethyl)cyclohexane

Attention! H302 Harmful if swallowed. H314 Causes severe skin corrosion and eye damage. H317 may cause an allergic reaction to your skin. H412 Harmful to aquatic life with long lasting effects.

Warning! P101 If medical attention is needed, have container or label at hand. P102 Keep out of reach of children. P103 Read all instructions carefully and follow them. P303+P361+P353 IF ON SKIN (or hair): Remove contaminated clothing. Wash the skin with water

Product features:
Crystal Clear Finish: Enhance the natural beauty of wood and other materials with a highly transparent and clear finish.
Self-leveling: no bubbles when used correctly. The formula provides a flawless and clear finish.
Excellent resistance to carbamates
Versatility of use: Ideal for jewelry making, especially with silicone molds with 1-15mm height for peak results.
Flexible Applications: Create trays, trays and more that can be adjusted for larger pour volumes depending on room temperature and material volume.
100% DIPON quality: developed, tested and manufactured in our own factory. We guarantee the highest quality and control.

[või duši all]

. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing. P310 Call a POISON CENTER/doctor immediately. P321 Special treatment (see this label). P362+P364 Remove contaminated clothing and wash before reuse. P405 Keep locked up. P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manufacturer: DIPON.DE Removable Automotive Coatings GmbH & Co. KG, Germany