General features:
- Mixing ratio: 2:1 by weight (A+B)
- Processing time (23°C), 200 grams: approx. 50 min (23°C -> 40°C).
- Recommended material temperature (A+B): 20°- 24°C
- Recommended ambient temperature: 20°C – 25°C
- Viscosity A (mPa*s) at 23°C: A 730 ± 50
- Viscosity B (mPa*s) at 23°C: B 5500 ± 50
- Layer thickness (20°C): 1 – 20 mm
- 0% VOC content
- Excellent absorbency (on wood) and adhesion
- Very little shrinkage (< 0.1%)
- Suitable for use with wood, concrete, glass, metal, glass and carbon fiber fabrics, natural stone, quartz sand, marble, granite.
- Crystallization is stable
- Bio-based ingredients in epoxy resin
- Free of CoRAP and sVHC substances
- State-of-the-art base amines and additives with extremely low yellowness
- Food safe: Contains no sVHC or CoRAP ingredients. Food safe after full curing.
What to use:
Crystal clear casts: creating transparent and artistic shapes.
Creating intricate jewelry, stylish trays and detailed geode style items.
Surface Finishing: Creating and decorating 3D floors, premium kitchen countertops and flawless epoxy countertops.
Floors: designing floors with outstanding 3D effects for living spaces.
Creating Geode Art: State-of-the-art “geode” art production, precise and detailed casting capabilities
Repair work
Creating works of art from resin using different techniques such as casting, painting or rolling.
Furniture protection: repair and preservation of furniture surfaces.
How to use:
LuminaCast 7 Design Flow should be accurately weighed into a clean container with a mixing ratio of 2:1 by weight . A scale and two mixing cups are required for accurate weighing and mixing. Do not mix by volume as this may cause an incorrect result. Mix components A and B together, mixing time about 5 minutes. The A+B mixture is then transferred to a new clean container and mixed again for three to four minutes. Important note: Always weigh A (resin) and B (hardener) accurately, an inaccurate amount will result in incomplete curing. The higher the room temperature and the larger the amount mixed, the faster the exothermic reaction (calcification) occurs.
Safety instructions
Component A:
Attention The reaction mass of 4,4′-methylenediphenyldiglycidyl ether 2,2′-[metüleenbis(p-fenüleenoksümetüleen)] bisoxirane and 2,2′-[metüleenbis(ofenüleenoksümetüleen)] bisoxirane and [[2-[p- ( oksiranüülmetoksü)bensüül] Phenoxy]methyl]oxirane oxirane, mono[(C12-14-alkyloxy)methyl]derivative Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate and bis(1,2,2,6,6-pentamethyl -4-piperidyl) sebacate.
Safety! H315 Causes skin irritation. H319 Causes severe eye irritation. H317 may cause an allergic reaction to your skin. H412 – long-term toxic effect on aquatic organisms.
Caution! P101 If medical attention is needed, have container or label at hand. P102 Keep out of reach of children. P103 Read all instructions carefully and follow them. P261 Avoid breathing dust/fume/gas/mist/vapour/spray. Avoid release of P273 to the environment. P280 Wear protective gloves/goggles/face protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. If possible, remove contact lenses. Continue rinsing. P333+P313 If skin irritation or rash occurs: Get medical attention. P501 Dispose of contents/containers in accordance with local/regional/national/international regulations.
Safety instructions Component B
Safety! Contains: 3-aminomethyl-3,5,5-trimethyl-cyclohexylamine, trimethylolpropane-poly(oxypropylene)triamine, cyclohexanemethanamine, 5-amino-1,3,3-trimethyl-, reaction products with bisphenol A diglycidyl ether homopolymer, phenylcarbinol.
Caution! H302 Harmful if swallowed. H314 Causes severe skin corrosion and eye damage. H317 may cause an allergic reaction to your skin. H412 Harmful to aquatic life with long lasting effects.
Warning! P101 If medical attention is needed, have container or label at hand. P102 Keep out of reach of children. P103 Read all instructions carefully and follow them. P303+P361+P353 IF ON SKIN (or hair): Remove contaminated clothing and undress immediately. Wash the skin with water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing. P310 Call a POISON CENTER/doctor immediately. P321 Special treatment (see this label). P362+P364 Remove contaminated clothing and wash before reuse. P405 Keep locked up P501 Dispose of contents/containers in accordance with local/regional/national/international regulations.
Manufacturer: DIPON.DE Removable Automotive Coatings GmbH & Co. KG, Germany
