🌱 environmentally friendly
🌱 non-toxic
🌱 VOC-free
🌱 vegan
🌱 without solvents
🌱 mineral product
The NatuResin product is strong and durable. This makes this product ideal for creations that need to be able to withstand the elements and are intended for outdoor use. You can paint with different colours and pigments (such as chameleon and mica picment powder).
INSTRUCTION FOR USE: It is important to weigh components accurately to ensure that material specifications are met. Failure to follow the instructions can lead to reduced strength, slower curing and reduced durability. The working environment should be room-humid, moisture-free and protected from direct sunlight. Avoid environments where solvent-based compounds are regularly used. The containers used for mixing must be clean, dry and large enough.
SEGAMISSUHE
* White single component powder 100:27 (powder: water), by weight
* Catalysis time: 40 minutes
* Colour: white
NB! It is possible to change the mixing ratio by adding mineral or metal fillers, sands, light fillers, etc.
SEGAMINE
* Prepare a large container to hold the two components.
* Add the desired amount of liquid to the container.
* Add the base powder component (pre-weighed according to the ratio of use) to the liquid little by little while stirring continuously.
* Once all the base powder component has been added, continue mixing until a liquid, lump-free mixture is obtained.
The time limit for a standard rest is 12 – 15 minutes.
Once the NatuResin resin mixture has been poured into the mould, tap the mould firmly a few times against the supporting surface to facilitate the escape of air bubbles from the mixture.
